Description
Australian-Made Starlink Gen 2 Flat Mount Kit
Designed and 3D printed in Queensland, Australia, this low-profile mounting kit provides a secure and tidy way to install a Starlink Gen 2 rectangular dish on a caravan, camper, motorhome, 4WD touring setup or suitable roof rack.
The six-piece design forms a strong supporting frame around the dish while maintaining a clean, streamlined appearance.
Key Features
- Designed for the Starlink Gen 2 rectangular dish
- Low-profile design for touring and mobile installations
- Suitable for caravans, campers, motorhomes, 4WDs and compatible roof racks
- Six-piece modular mounting kit
- Manufactured from durable, heat-resistant ABS
- Printed with five perimeter walls for additional rigidity
- Dense gyroid internal structure
- White finish that can be primed and painted
- Designed and 3D printed in Queensland, Australia
Strong ABS Construction
Each component is manufactured from high-quality ABS, selected for its strength, rigidity and heat resistance. The parts are printed with five perimeter walls and a dense gyroid internal structure to provide a robust result suited to demanding touring applications.
As with all 3D-printed products, subtle layer lines and small surface variations may be visible. These are normal characteristics of the manufacturing process and do not affect the intended operation of the mount.
Colour and UV Protection
This kit is supplied in white ABS. It can be left in its original finish or prepared and painted to suit your vehicle or installation.
For improved appearance and maximum outdoor longevity, we recommend applying a suitable plastic primer followed by automotive paint or a 100% UV-stable clear coat. Always confirm that the selected coating is compatible with ABS plastic.
Installation Options
The mount may be installed using appropriate mechanical fasteners, a high-strength ABS-compatible adhesive, or a combination of both. The correct method will depend on the mounting surface, vehicle and intended use.
Mechanical fastening is generally preferred where future removal or servicing may be required. If using adhesive, carefully follow the adhesive manufacturer’s preparation, curing and environmental instructions.
Package Includes
- 1 × Starlink Gen 2 flat mount kit
- Six 3D-printed white ABS mounting components
Additional Items Required — Not Included
- 4 × suitable lengths of 2 mm aluminium angle
- 12 × M3 stainless-steel flat-head screws
- Appropriate mounting fasteners for your installation surface
- ABS-compatible high-strength adhesive, if required
- Plastic primer, paint or UV-stable clear coat, if desired
- Starlink dish, cable, router and other Starlink equipment
Aluminium angle must be measured and cut to suit the mount and your particular installation. Confirm all measurements before cutting or drilling.
Before Ordering
- Confirm that your dish is the rectangular Starlink Gen 2 model.
- Check that your intended mounting surface is sufficiently strong and suitable.
- Plan the cable route and allow adequate clearance before installation.
- Do not cover or enclose the dish, as this may interfere with signal reception and heat dissipation.
- Position the dish where it has the clearest practical view of the sky.
Australian Designed and Manufactured
DigArt mounting components are designed and manufactured in Queensland for Australian touring setups. Every kit is produced with an emphasis on practical installation, strength and a clean finished appearance.
Unsure whether this mount suits your Starlink dish or installation? Contact DigArt Australia before ordering and we will be happy to help.
